Xinzheng Industrial Park,Qingyuan West Street,Weifang Economic Development Zone,Shandong,China
diesel generator  +86 15905360231    diesel generator
Current Location:HOME > generator 700kva price > Oil pump fault inspection and maintenance >
Oil pump fault inspection and maintenance
Update:2017-02-13 Tags:the

1, often fatliquoring, electric oil pump for high speed running, grease easily, so must make thegenerator supplier bearings in the gear oil pump lubrication can keep clean, and pay attention to add in.

2, check repair gear pump, electric oil pump should be regularly check, repair, must check the power cord, wire, plug, switch are in good condition, whether the insulation resistance is normal, brush the tailstock is loose, commutator and brush contact is good, the armature winding expansion of stator winding is a moderate level open circuit phenomenon, whether the damage of bearing and rotating parts and so on.

3, save each parts and exchange the same parts, when overhauling the gear oil pump, every parts shall be kept well, it is important to pay special attention to the explosion-proof explosion-proof surface of part, including hair, insulation gasket and injury of casing can't make it, if there are any damage, must change the new parts, the same shall not adopt any of below raw material substitute materials or the performance of the original specifications of parts, assembly all parts should be packed according to the original position, can't miss.

4, pay attention to the insulation resistance gear pump, lay up over a long period of time or in damp environment use electric pumping liquid pump, before use must use 500 v megohmmeter measure the insulation of the winding resistance. Such as winding and insulation resistance between the motor housing is less than 7 megohm, must to dry the winding.

5, pay attention to save electric pump should be put in a dry, clean and free of corrosive gas environment.

Copyright Weifang Huaquan Power Machinery Co.,Ltd
Powered by Huaquan